ALUCOBOND® PLUS can be cut with a vertical panel saw, circular or jig saw.
Carbide tipped (CT) saw blades
| Blade geometry | Tooth thickness approx. 2 - 4 mm, tapered to the inside to prevent jamming |
| Tooth geometry | Trapezoid tooth / flat tooth |
| Pitch t | 10 - 12 mm |
| Clearance angle α | 15° |
| Rake angle γ | 10° positive |
| Maximum feed s | 20 m/min |
| Important: | For ALUCOBOND® PLUS special carbide tipped (CT – quality K01) saw blades are used. The speed must be reduced by 50%. |
Carbide tipped (CT) saw blades for HOLZ-HER and Striebig circular panel saws.
Trapezoid/flat tooth saw blade, flat teeth 45° chamfered for burr-free edges.
| Saw blade-Ø | D = 300 mm (for Striebig vertical panel saw Standard II) |
| Number of teeth | t = 72 Speiser Code No. 070 60 651 |
| Saw blade-Ø | D = 250 mm (for Holz-Her vertical panel saw 1255 ALUCOBOND® PLUS) |
| Number of teeth | t = 60 Speiser Code No. 020 40 151 |
| Bore ø | D = 30 mm |
| Tooth thickness | 3.2 mm |
| Clearance angle α | 15° |
| Rake angle γ | 10 ° positive |
