Rear-ventilated façade
Rear-ventilated façades are one of the most successful façade systems today. In addition to functional safety, architects particularly appreciate the design options offered by a rear-ventilated façade. In this way, the design of the façade can be individually tailored to the characteristics of a building.
The FVHF sees a particular focus on emphasising the technical qualities of the rear-ventilated façade system. These lie primarily in the structural separation of the thermal insulation and weather protection functions. The susceptibility to damage is therefore lower than with other façade systems. In addition, special requirements for fire safety, sound insulation or lightning protection, for example, can be implemented easily and in an appealing design.
ALUCOBOND® fastening systems
ALUCOBOND® systems
tray panel suspended
on stainless steel bolts for vertical façade layout
Screwed tray panel
for vertical façade layout
Tray panel SZ20
Tongue and groove principle for horizontal façade layout
Bonded
for vertical / horizontal façade layout
Riveted / screwed
on vertical profiles for vertical façade layout
Riveted
on omega profiles for vertical installation
Clamped / screwed
on double top hat profiles
Riveted weatherboard effect/
on aluminium substructure
easy fiX 90°/135°
for vertical / horizontal façade layout
easy fiX 135° /135°
for vertical / horizontal façade layout
easy fiX 90°/90°
for vertical/horizontal façade layout
Isolink® renovation façade
e.g. easy fix 135°/135° and other similar systems
To avoid differences in reflection (for metallic, Anodized Look, naturAL, Spectra and Sparkling colours), it is essential to install all composite panels pointing in the same direction as the arrows marked on the protective peel-off foil. Panels from different production Batches may vary sightly in colour. To ensure colour consistency, we strongly recommend ordering the total material requirement for a project in one order.
ALUCORE® fastening systems
ALUCORE® systems
Façade clamped
Façade suspended
on stainless steel bolts for vertical façade layout
Façade suspended
ALUCORE® XXL
To avoid differences in reflection (for metallic, Anodized Look, naturAL, Spectra and Sparkling colours), it is essential to install all composite panels pointing in the same direction as the arrows marked on the protective peel-off foil. Panels from different production Batches may vary sightly in colour. To ensure colour consistency, we strongly recommend ordering the total material requirement for a project in one order.
For more information, please go to Technical extras or contact your local ALUCOBOND® representative.
Approvals
